The all-aluminum composite anodized construction configuration makes the P7 M40 laser engraving machine tougher and works on etching accuracy. Convenient all-metal construction, 85% pre-assembled, for quick introduction. The all-glass fire-resistant channel can channel 97% of the glare, which usually does a good job of protecting your eyes. You and those around you don't have to wear goggles, and you can visibly watch the laser etch. Reduce the cost of goggles and the hassle of wearing them. Glass is fire-resistant and safer to use. Comes with a handle that makes it easier to change the level of the laser, and even the spinner automatically stops working when you move it.
The laser adopts 4-overlay focal beam collimation and center innovation; the optical power is 4.5~5W, and the attention area is reduced to 0.02mm²; the high-thickness laser can undoubtedly cut 10mm thick wood and 6-8mm dark acrylic; can directly engrave Reflective tempered steel metal and ceramic. It should be possible to etch without changing the center length; the recently updated packaged spot enlarges the energy focus by 200%, and the spot size is only 0.02mm², which can be considered for both precision etching and high-energy cutting.
At the same time, the laser force of the centering laser is more stable than that of the zoom laser. ATOM STACK P7 laser engraver can be applied to different mature etching programs; like LaserGRBL, LightBurn; support Win XP/Win 7/Win 8/XP/Win 10, also supports MAC frame (LightBurn); etching record design supports NC, BMP, JPG, PNG, DXF, etc.
The ATOMSTACK P7 Laser Machine is the best desktop high power DIY laser cutter and engraver for entrepreneurs, experts, planners, craftsmen, home creators and specialists. Plus, you can easily buy it for $249.99 from Atom-stack.com.