The body of this M50 is made of aerospace aluminum with cooling fans that automatically cool the machine to ensure efficient operation. You can use it for CNC cutting, laser engraving and many other things. It is worth mentioning that in terms of safety, Atomstack began to try to add gyroscopes to laser modules this year. Now it seems that their company has done a good job. It is certain that this new M50 will have a gyroscope. If the inclination angle of the engraving machine exceeds 20°, the machine will stop working, which is of course a good protection measure. .
The Atomstack M50 laser module uses two 5W laser modules combined into a 10W laser power; it can cut 8.5cm wood, which is a great improvement.
The light spot of M50 can be compressed to an area of 0.08*0.15mm; using double compression optical coupling technology, the engraving is more precise; even when engraving metal, the pattern is clear and clear. It can reach 1100 degrees Celsius when working with a laser. The laser is equipped with a protective cover to protect the user's eyes; no additional protective glasses are required.
Engravable materials: wood, bamboo, cardboard, plastic, leather; PCB board, aluminum oxide, non-reflective plating, lacquered metal, utility knife after blackening.
The ATOMSTACK M50 is a very practical laser engraver. It's a part, but you need very little time to assemble it. Since it is a laser, this model also has special eye protection, so it is safe to use.