Atomstack M4 2-in-1 handheld fiber laser engraving machine has its own handle, built-in TF card, and supports offline engraving and marking. The engraving head weighs only 2.8kg, which can easily hold and engrave more items and realize multi-scene use. M4 adopts dual red light positioning and one-key marking function, which simplifies the operation, does not need to repeatedly set parameters, and makes the work easier. The reserved window at the bottom allows it to support engraving of items up to 96mm. The M4 fiber engraving and marking machine can engrave metals and alloys, rare metals, metal oxides, ABS materials, epoxy resins, leather, wood (paint), ceramics (paint), stone, etc. NOTE: Light colored or transparent materials will be engraved better if you paint/spray them black with a marker before engraving!
M4 marking machine adopts 1064nm wavelength infrared light source; it is suitable for fast marking of all metals and ABS, and the precious metal itself hardly consumes precious metal. The M4 industrial-grade galvanometer technology greatly improves the engraving and marking speed - the high speed of 12m/s is 5 times faster than the blue-ray marking machine. The 0.01-0.02mm ultra-long ultra-fine end-pumped infrared laser allows every detail of the engraving to be presented, perfectly presenting 4K-level high pixels. Atomstack M4 adopts dual infrared light positioning design, which can accurately locate the marking position without offset.
Unlike blue light sources, 1064nm infrared wavelengths are cold light sources. Even if you accidentally touch the screen, it will not burn, which can avoid personal injury. ATOMSTACK machine adopts mature engraving software and supports Win XP/Win 7/Win 8/Win 10/Win 11. Engraving files support PLT, DXF, BMP, JPG, JPEG image files; Code39, EAN, PDF417, DM barcode, QR code, dynamic files. There are precision scale lines on the lifting shaft, which is convenient for you to quickly measure the length. 70*70mm large engraving area to meet your various engraving needs. The diameter of the ultra-fine laser focusing area is reduced to 0.02mm; the smallest markable character is about 0.06mm*0.15mm (tested with focusing film).
ATOMSTACK M4 2-in-1 handheld fiber laser engraver adopts a highly integrated design, and the core components are lightweight, bringing more usage scenarios. It can be hand-held for marking on non-horizontal surfaces, walls and facades. Start your creation anytime, anywhere. You can get it from Atom-stack.com for $1,399.99 for a limited time. Buy now for an extra 5% off!