When using a laser engraver, proper ventilation must be ensured to keep dust, noxious gases, particles and fumes out of the work area. In addition, there is a risk of fire, as the laser beam can suddenly increase the temperature of the surface, which can lead to a fire in the worst case.
All these problems can be solved by using an enclosure. It keeps fumes, particles and odors inside and exhausts them through a ventilation system. If you are using the laser engraver in an enclosed area, you must use an enclosure.
Not only does the enclosure keep the environment clean, it also reduces noise in the area. It also reduces the risk of fire if it is made of fire resistant material. It has many benefits and all laser engraving machines should be inside the enclosure for safety.
Atomstack is pleased to announce the state-of-the-art housing available for the B1 and other open frame laser engravers.
There are undoubtedly many laser engraved cases available, but most lack the desired functionality. Also, some do not have proper ventilation and fire resistance.
Atomstack was crafted with all features in mind and created an all-in-one shell that solves all related problems.
Why is the Atomstack B1 Enclosure better than others?
Compatible with open frame laser engravers
Atomstack housings are compatible with almost all open frame laser engraving machines. The housing size is 736x651x358mm, which can easily install B1 and third-party open laser engravers.
If any 3rd party open frame laser engraver is smaller than the above size, the case is perfect. The case has three power port openings for different machines. Users can use any port according to the height of the machine.
Best of all, Velcro straps on the ends of the housing parts make assembly and disassembly quick and easy. It hardly takes 2 minutes to assemble the case. Foldable case for storage after use; it doesn't take up much space.
Atomstack is more concerned with the construction of the shell. When engraving, the temperature of the object suddenly increases. Due to the powerful laser, there is a possibility of fire. Therefore, the construction of the housing is very important.
good ventilation
The enclosure is designed to provide optimum ventilation airflow. There are small air intakes on the side for fresh air. The smoke, odor and dust particles are then expelled through the exhaust.
It is also possible to install exhaust ducts on the exhaust fan to exhaust harmful air outside. Overall, the enclosure increases ventilation efficiency by 200%.
Laser engraving and cutting machines present various health hazards. Some materials, such as acrylic, PVC, and rubber, emit very harmful toxic fumes.
Atomstack enclosures exhaust dust particles and harmful fumes through exhaust. The enclosure keeps the environment clean and safe even when you work in an enclosed area.
Noise is also a problem with laser machines. Thanks to the casing, the noise of the machine is greatly reduced.
Another prominent problem with laser machines is the harmful laser beam. Goggles must be worn during operation. But blue light is filtered out thanks to the viewing window of the Atomstack housing. Therefore, there is no need to wear goggles.
If you want air filtration, you can also use an Atomstack Negative Ion Air Purifier. You can attach a purifier to the case and it will purify the air.