Today, laser engravers come in all shapes and sizes. You can even start with a small desktop. But apart from the obvious size difference, what else should you pay attention to when choosing a laser engraver? Below is a list of criteria to help you make up your mind.
Small laser engraving machine
Small laser engravers can be a great replacement for larger industrial models. Such as the Atomstack S20 Pro laser engraving and cutting machine.
Laser Safety
Pay attention to laser safety! Serious damage can result from irresponsible operation of a Class 4 laser. Before making a decision, carefully assess your needs. You'll sleep better if you buy a machine that's less powerful but still meets your needs.
Every type of laser requires better eye protection. Do your research to see if the laser engraver you have in mind includes the necessary glasses. If not, any responsible manufacturer will proactively tell you the laser level built into the machine so that you can buy the right safety glasses in advance.
Power Supply
What kind of power connector does the machine need? Can you plug it into any outlet in your office/workshop, or do you need a power cord to operate it?
Obviously, the laser unit requires a lot of power. However, some people don't know how much power other components consume. Cooling and exhaust modules will make you feel on your electricity bill. So do the math and try to figure out if the benefits of setting up a laser engraver in your office or workshop are worth the money.
Cooling
Intense lasers require continuous cooling, but there are important differences between solutions. How does the cooling device of the laser work? Tubes made of metal/ceramic use air and can last up to 5.5 years. However, they are much more expensive than cooling tubes made of glass. The latter uses water as a coolant. The downside of this method is that it is very inconvenient as you need to place a bucket next to the laser engraver to collect the waste water.
Exhaust Air
Laser engraving can create a lot of confusion. Generates large amounts of dust which may be harmful if inhaled. Therefore, it is necessary to install exhaust pipes to maintain a healthy environment in the workshop. This duct needs to be large enough in diameter to remove all dust. Otherwise, the engraving machine will still be a health hazard.
Also, you should take into account that air filters can make a lot of noise, which can be a distraction if you're considering installing a laser engraver in your office.
The best laser engravers of 2022 buyers guide
What is the use of laser engraving machine
Buyers guide to the best laser rotary roller