Atomstack M4 fiber laser engraver marking machine adopts 1064nm wavelength infrared light source, which is suitable for fast marking of all metals and ABS. Precious metal marking hardly consumes the precious metal itself. Atomstack M4 industrial-grade galvanometer technology greatly improves the engraving and marking speed - the high speed of 12m/s is 5 times faster than that of Blu-ray marking machines. 0.01-0.02mm ultra-long and ultra-fine end-pumped infrared laser, so that every detail of engraving can be presented, perfectly presenting 4K-level high pixels. This marking machine adopts dual infrared light positioning design, which can accurately locate the marking position without offset.
Different from the blue light source, the 1064nm infrared wavelength is a cold light source. Even if the screen is accidentally touched, it will not be burned, and personal injury can be avoided. Atomstack M4 machine adopts mature engraving software, supports Win XP/Win 7/Win 8/Win 10/Win 11, engraving files support PLT, DXF, BMP, JPG, JPEG image files, Code39, EAN, PDF417, DM barcode, QR code, dynamic file. There are precision scale marks on the lifting shaft, which is convenient for you to measure the length quickly. 70*70mm large engraving area to meet your various engraving needs. The diameter of the ultra-fine laser focus area is reduced to 0.02mm, and the smallest markable character is about 0.06mm*0.15mm (tested with focusing film).
Atomstack M4 2-in-1 handheld fiber laser engraving machine comes with a handle, built-in TF card, supports offline engraving and marking, the engraving head weighs only 2.8kg, easy to hold and engrave more items, and realize multi-tasking scenarios. M4 adopts dual red light positioning and one-button marking function, which simplifies operation and does not need to repeatedly set parameters, making work easier. The reserved window at the bottom enables it to support the engraving of items up to 96mm in height. Atomstack M4 fiber engraving and marking machine can engrave metals and alloys, rare metals, metal oxides, ABS materials, epoxy resins, leather, wood (painted), ceramics (painted), stone, etc.
Atomstack M4 2-in-1 handheld fiber laser engraver adopts highly integrated design, and the core components are lightweight, bringing more usage scenarios. It can be hand-held to mark non-horizontal surfaces, walls and facades. Start your creation anytime, anywhere. You can buy the Atomstack M4 Laser Engraver from Atom-stack.com for $1,290.00 (VAT included).