The ATOMSTACK S10 Pro is a laser engraving and cutting machine that works with most typical materials such as wood, porcelain, rubber, paper, brass or stainless steel. If you work with any differentiated material, consult the technical specifications of the machine.
It has an operating power of 50W and laser diode power of 10W. The laser wavelength is 455±5nm and the accuracy is 0.01mm. Note that both are fixed focus.
The working area of the ATOMSTACK S10 Pro laser engraving and cutting machine is 410 x 400 mm.
Unlike the 3D printers that we usually present here, the FLSUN SR Delta has a circular printing base with a diameter of 260 mm, allowing you to print parts with a maximum of 330 mm. We are therefore talking about a Delta system, rather than a Cartesian one. With this cylindrical shape it is possible to achieve faster printing, which varies between 150 and 200 mm/s.
Filament is used to create the part, with support for the most common materials such as PLA, ABS or TPU. The nozzle has a diameter of 0.4mm and the layers can have a thickness between 0.05 and 0.4mm.
It integrates a color screen in the front area to carry out all the control, it allows to integrate a memory card to print the part or the process can be done online, through Wi-Fi connection.