Laser cutting has many advantages, which is why laser cutting machines are widely used compared to other types of cutting machines.

Laser cutters can cut a variety of materials. You can cut almost anything, depending on the type of laser cutter. It can cut metals including copper, aluminum, stainless steel, iron and precious metals. It is also suitable for non-metals such as glass, plastic and wood. Therefore, there is a wide range of materials that can be cut with a laser cutter.

The precision of laser cutting machines is very high because the beam is very concentrated. The diameter of the laser is only a fraction of a millimeter. The slit width is very narrow due to the highly focused beam. It is perfect for intricate cuts.

Laser beams are very intense, so they immediately raise the temperature of the material. The material reaches the vaporization temperature within milliseconds, and the laser sheet is rapidly cut. Projects can be completed at high speed. It is much faster than CNC milling.

Due to the very narrow laser beam, the edges are very smooth. No need to sand the edges to make them smooth.

Laser technology is more reliable in cutting. The system works for a long time and ensures accuracy and precision. You can start multiple projects at the same time. There is no need to replace the laser during this process as it does not wear out like a drill. Few surprises and unexpected delays.

The laser beam is ultra-fine, so the incision width is minimal. As a result, the laser beam cuts negligible material without causing a huge mess.

The first disadvantage is the high power consumption of the laser cutting machine. You might think that a 10W laser would consume no power. This 10W actually represents the optical power of the laser. The electrical input power of the laser is actually higher. Also, the machine consumes too much power. Total power is about 100 watts or more.

Certain materials, such as plastics, produce toxic fumes when exposed to the laser. These emissions are quite harmful to operators. The area should be well ventilated to handle such fumes.

The laser beam is very powerful. They can burn objects from corners while cutting. The object can also change color.

When using a laser cutter, people are involved. All safety standards must be followed. Occasionally, the machine needs to be serviced, and the risk to the maintenance crew is high. Severe burns may result if there is any contact with the laser.

The Best Laser Cutter for Small Businesses
Atomstack S10 Pro is a high precision and powerful laser cutting and engraving machine. It's perfect for DIY projects, hobbyists, professionals and small businesses. With its powerful laser technology, it can cut various types of materials at once. The best part is that it is very compact, like a desktop printer.

Atomstack has your choice of 10W and 5W laser modules. It also introduces the most powerful laser module in the world, the 20W one, which can also be attached to the S10 Pro laser engraver. The 10W laser module contains two lasers that are combined with mirrors and focused using a convex lens. It makes the laser more powerful and intense.

The laser beam is ultra-fine; the diameter of the laser is only 0.08 x 0.08mm. It provides high precision and precision, making the cut finer and smoother. Since the beam is highly focused and the kerf width is minimal, there is little waste.

Powerful laser cuts 10mm plywood and 5mm acrylic in one pass. It cuts objects with extra precision and perfection. It works with over 300 materials, so you can choose from a wide variety of materials for engraving and cutting.

Anyone can use Atomstack S10 Pro because it is suitable for beginners and does not require any knowledge and prerequisites. It runs through LaserGRBL, which is a simple piece of software. Plus, it's LightBurn compatible if you want to do professional engraving.

For small businesses, the Atomstack S10 Pro is the perfect choice. It's cheap and has several accessories to choose from. Laser modules can be easily replaced and upgraded as needed. It can be a source of income because you can make your own products by laser cutting and engraving.

Frequently Asked Questions about Laser Cutting Machines
Can a laser cut metal?
Yes, laser cutters can cut metal, but not all types of laser cutters can do this. CO2 lasers cannot cut metals because they are not powerful enough. However, fiber laser cutters and crystal laser cutters can cut various types of metals.

Is laser cutting safe?
Additional precautions and safety measures are required. During operation, the laser is equipped with safety measures. Therefore, they are safe to use. However, some materials, such as plastic, produce toxic fumes, so there should be a fume extraction system.

Does the laser cutting machine smell bad?
Laser cutters are odorless, but some materials produce odors, fumes, vapors, and particles. Materials such as plastic produce toxic odors that are harmful to the human body. Therefore, safety precautions must be taken when cutting such materials.