Laser engravers and cutters are gaining popularity worldwide, especially in the private sector. Atomstack A5 M50 Pro is an upgraded version of Atomstack A5 M50.
This laser engraver and cutter features a quadruple lens compression spot and 5 to 5.5 watts of light power. The laser focus area is 0.08 x 0.08 mm. High-density lasers can cut materials such as wood up to 20mm thick and black acrylic up to 15mm, and can also engrave stainless steel, ceramics, glass, leather, bamboo, plastic, wood, acrylic and more. Filtering panoramic glass filters up to 97% of UV rays and should not be removed. As it is based on a modular design, the engraving area can be increased from 410 x 400 mm to 410 x 850 mm with additional extension kits.
The A5 M50 Pro uses fixed-focus laser technology to create a laser focal spot half the size of other lasers. Limit switches and scales are attached to the X and Y axes. Aluminum alloy is used as frame material. Assembly of the device takes approximately 20 to 30 minutes. The machine can be stopped using the emergency stop button.
The panoramic glass with flame-retardant filter can filter out 97% of ultraviolet rays, which plays a very good role in protecting the eyes. You and those around you can see laser engraving clearly without glasses.
Reduce your glasses cost and the inconvenience of wearing glasses. Glass is fireproof and safer to use. You can buy it now on Atom-stack.com for just $299.99 with free shipping in the US.