Features of Atomstack S20 Pro:
Atomstack launched the Atomstack S10 Pro laser engraver last year. This product introduces the highest 10W laser beam in the market. After a year of hard work, the company has brought a major upgrade to the laser engraving machines on the market.
After a lot of hard work, the company claims that the new S20 Pro is equipped with a total power of 130W. At the same time, the important laser power output of the engraving machine is 20W
In fact, the S20 Pro and X20 Pro are the same, at least in terms of hardware, only the bezel color is different. It can be seen that the S20 Pro is also a 20W laser engraving machine with powerful cutting ability.
The world's first quad-core diode laser
12mm solid wood cutting at one time
8mm acrylic cut in one pass
Even can cut 0.05mm thin metal plate
Powerful air assist package built in
If you're looking for a machine that can precisely cut and engrave with a laser, you're in luck. The S20 Pro is the world's first diode laser engraver with 4-core coupled modules that together form a 20W super laser.
The Atomstack S20 Pro is a 130W laser engraver that couples 4 x 6W cores together to create an ultra-powerful 20W laser that you can use to cut or engrave on any surface. Not only is it a powerful laser, it is also very precise as its compression technology provides a cutting point of 0.08 to 0.1mm.
There's no surface that the Atomstack S20 Pro can't cut (or carve). Its 20W laser power can cut 12 to 15mm solid wood, 5mm MDF, 8mm acrylic and even 0.5mm deep metal sheets.
Additionally, this power allows the laser to deliver a wide variety of tones when engraving. In fact, the S20 Pro offers up to 256 shades of gray, so engravings are not just black, but have natural tonal transitions.
One of the innovative features of the S20 Pro is its twin-cylinder compression technology, which ensures a gas supply of 25 liters per minute at a pressure of 120 Kpa, preventing the 4-core module from heating up. It also has a built-in air assist kit so you don't need to buy extra accessories.
Finally, you should know that the Atomstack S20 Pro laser engraving machine is compatible with any type of design format (JPG, PDF, PNG, SVG, etc.) and can be controlled using your phone through an app. And there's no need to stay connected to your phone or computer, as the unit has a built-in panel that continues to operate in offline mode.
Additionally, the company claims the new router can easily cut 8mm acrylic in one pass, 12mm solid wood in one pass, and even cut 0.5mm thin metallic paper.
The new machine has a built-in air assist system. This system greatly enhances the experience of using it. Plus, it leaves the cutting surface clean and reduces burn marks. So you won't have to spend extra money on air assist if you want to buy that product.
In the working area it increases to 450 X 450mm. The best part is that Atomstack S20 Pro supports offline work. So now you can copy files to TF card when offline. For easy control of the router, customers can install the Atomstack app.