Atomstack S20 Pro is a most powerful diode laser engraver cutter device in the market. It has a rectangular engraving area of 400*400mm and it features a very premium control panel with display and quality buttons. You can cut and engrave on wood, metal, acrylic, thin plastic board etc. by using this machine. The machine combines the power of four lasers to make a super laser to cut and graze on hard surfaces easily.
If you have a high demand for cutting the wood then this machine might be very useful for you. It can cut up to 12mm of wood in one pass.
The machine can also be useful for a common man because, at home, they require wood cutters frequently.
This machine is an awesome laser engraver with many cool features in it. You can design your favourite designs on wood, leather, metal, acrylic etc. If you are an artist then this machine may be very useful for you. You can use this machine to also engrave your household furniture, metal Sheet or pots etc.
Large carving area
You can carve a 400×400mm area at one time. The engraving accuracy of the machine is 0.01mm. That’s highly accurate for engraving for a common purpose. You can do the engraving work by using the photos from a mobile album, sd card etc. Expandable engraving size, modular design of the body mechanism, only need to replace the frame components, you can get 400*850mm super large engraving size.
Quad-core laser
Atomstack S20 Pro is equipped with a quade core laser module, which consists of four 6W laser beams coupled into a single beam with a power of 20W.
This makes the machine capable enough to cut a 12mm wooden sheet, 8mm of Acrylic, and 0.5mm of metal sheet in one Pass.
32-bit motherboard
With a 32-bit motherboard, the machine can engrave beautiful designs very fast. So, you don’t spend much time in engraving and can do other important work also. This motherboard can work offline also.
Powerful air assist pump
You can engrave beautiful designs without stopping yourself for anything as the machine is equipped with a 10-30L/min air assist pump kit, which can improve the cutting and engraving speed as well as the life of the service. It helps blow away the accumulated dust and rust.
You get these things in the full pack of this machine